– 40 –
Up to two external microphones can be connected to
the AUDIO IN CH1/CH2 Connectors.
Phantom power supply can also be supported
by setting the MIC POWER switch to the ON
position.
AUDIO IN Switch: Set the AUDIO IN Switches
of the channels to which
microphones are
connected to REAR [MIC].
Audio Input Preparations
Using the Microphone not Mounted to the Main Unit
|
Note
{
When extending the microphone, use a cable which supports the phantom power supply type of
microphone.
Using the Microphone not Mounted to the Main Unit
AUDIO IN switch: Set the AUDIO IN switch for
the audio channel you wish to
record to FRONT [MIC].
To the MIC IN Connector
