– 46 –
Setup menus (continued)
No./Item
Description
USER menu <TIME CODE>
500
VITC BLANK
This selects whether to output the
VITC signal at the positions selected
by setup menu items No. 501 (VITC
POS-1) and No. 502 (VITC POS-2).
0000 BLANK :
VITC signals are not output.
0001
THRU :
VITC signals are output.
501
VITC POS-1
This sets the position where the VITC
signal is to be inserted.
Note:
The same line as the one used for the
setup menu items No. 502 (VITC POS-2)
and No. 662 (UMID POS) setting cannot
be set.
[625i system]
0000
7L
:
:
0004
11L
:
:
0015
22L
[525i system]
0000
10L
:
:
0006
16L
:
:
0010
20L
502
VITC POS-2
This sets the position where the VITC
signal is to be inserted.
Note:
The same line as the one used for the
setup menu items No. 501 (VITC POS-1)
and No. 662(UMID POS) setting cannot
be set.
[625i system]
0000
7L
:
:
0006
13L
:
:
0015
22L
[525i system]
0000
10L
:
:
0008
18L
:
:
0010
20L
503
TCG REGEN
This selects the signal to be
regenerated when the time code
generator (TCG) in the REGEN mode.
0000 TC&UB :
Both the time code and user bit are
regenerated.
0001
TC :
Only the time code is regenerated.
0002
UB :
Only the user bit is regenerated.
505
EXT TC SEL
This selects the time code to be used
when an external time code is to be
used.
0000 LTC :
The LTC of the TIME CODE IN
connector is used.
0001 VITC :
The VITC of the input video signal is
used.
No./Item
Description
506
BINARY GP
This sets the usage status of the user
bit of the time code generated by the
TCG.
0000 000 :
NOT SPECIFIED (character set not
specified)
0001 001 :
ISO CHARACTER (8 bits character
set based on ISO646, ISO2022)
0002 010 :
UNASSIGNED 1 (undefined)
0003 011 :
UNASSIGNED 2 (undefined)
0004 100 :
UNASSIGNED 3 (undefined)
0005 101 :
PAGE/LINE
0006 110 :
UNASSIGNED 4 (undefined)
0007 111 :
UNASSIGNED 5 (undefined)
507
PHASE CORR
This selects whether to control the
phase correction of the LTC which is
output from the TIME CODE OUT
connector.
0000 OFF :
Phase correction control is not
performed.
0001
ON :
Phase correction control is performed.
508
TCG CF FLAG
This selects whether the CF flag of
the TCG is to ON.
0000 OFF :
CF flag is OFF.
0001
ON :
CF flag is ON.
509
DF MODE
This selects the DF or NDF mode for
CTL and TCG.
0000
DF :
The drop frame mode is used.
0001 NDF :
The non-drop frame mode is used.
Notes:
• Drop frame mode is valid only when the
REMOTE button is lit or the setup menu
No. 001 (LOCAL ENA) is set to ENA.
• This menu option is not displayed in the
625i system.
The underlined items indicates the initial setting.
