– 54 –
900
LCD
PROTECT
Sets LCD protect mode.
0000
OFF :
LCD protect mode is off.
0001
ON :
LCD protect mode is on.
Notes:
• If no operations are performed on the
front panel, or if the video is not
updated for some length of time, LCD
output is turned off after approximately
five minutes.
• To turn off LCD protect mode, operate a
button or dial on the front panel, or start
playback through the controller.
Note that the operation performed to
turn off LCD protect mode will be
executed.
Setup menus (continued)
USER menu <V BLANK>
The underlined items indicates the initial setting.
802
TELETEXT
SEL
(For AJ-SPD850P)
This selects the type of teletext
signals to be recorded.
0000
MOJI :
MOJI system
0001
NABTS :
NABTS system
Notes:
• This menu option is not displayed in the
625i system.
• VITC signals are often mistakenly
detected as teletext signals when the
NABTS system has been selected. If
this happens, select MANU as the
setting for setup menu No. 803
(TELETEXT DET), then select the line
for teletext signals.
No./Item
Description
No./Item
Description
Sub-screen
[525i system]
00
LINE 10&273
:
11
LINE 21&284
[625i system]
00
LINE 7&320
:
15
LINE 22&335
0000 BLANK :
Blanking is forcibly effected.
0001
THRU :
No blanking is effected.
901
BL BRIGHT
This sets the brightness of the LCD's
backlight.
0000
NORMAL:
The backlight lights at the normal
brightness level.
0001
HIGH:
The backlight lights brightly.
902
GUI OUTPUT
This sets whether to output the GUI
screen display to the ANALOG
COMPONENT VIDEO OUT, ANALOG
COMPOSITE VIDEO OUT and SERIAL
DIGITAL COMPONENT VIDEO OUT
connectors.
0000
OFF:
The screen display is not output.
0001
ON:
The screen display is output.
