background image

– 18 –

Chapter 2 Description of Parts — Front side

Front side

2

1

4

3

5

7

6

8

9

10

Lens cable/microphone cable clamp

Used for securing the lens and microphone cables.

Lens mount (Bayonet type)

This is where the lens is mounted.

<SHUTTER> switch

This is the electronic shutter switch.

<OFF>:

 Disables the electronic shutter.

<ON>: 

Enables the electronic shutter.

<SEL>:

 Switches the shutter speed within the preset range.

This switch cannot be used when the CCU or ROP is connected to the camera.

4  <MIC> terminal (front)

Used to connect the microphone (optional).
When using, set the switch on the rear side as follows.

 

f

<LINE/MIC/

+

48V> selector switch (<MIC 1>): <MIC> or <

+

48V> (when using a phantom microphone)

 

f

<FRONT>/<REAR> switch (<MIC 1>): <FRONT>

<USER 1> button

A user-selected function can be assigned to this button. Pressing the button performs the assigned function.

Tripod mount

Used to attach the tripod adaptor SHAN-TM700 (optional) when mounting the camera on a tripod.

7  <INCOM LEVEL> dial (front)

Used to adjust the volume level of the intercom according to the settings of <REAR>/<INC1 FRONT>/<INC2 FRONT> on the rear side.

 

f

<REAR>:

 Cannot adjust the volume level.

 

f

<INC1 FRONT>:

 Adjusts the volume level of the intercom 1.

 

f

<INC2 FRONT>:

 Adjusts the volume level of the intercom 2.

Lens lever

After the lens is mounted on the lens mount, this lever can be tightened to secure the lens.

9  <AUTO W/B BAL> switch

<AWB>:

 Automatically adjusts the white balance. When the white balance is automatically adjusted with the <WHITE BAL> switch on the side of the 

camera set to the <A> or <B> position, the white balance is adjusted in several seconds and the adjusted value is stored in the memory.

<ABB>:

 Automatically adjusts the black balance.

The operation performed when the CCU or ROP is connected to the camera can be set from [MAIN MENU] 

→ 

 [SWITCH MODE] 

 [W/B BAL 

SETTING].

10 

<SELECT> dial button

Turning the <SELECT> dial button while the menu screen is displayed moves the cursor to a setting item. The menu setting can be confirmed by 
pressing the <SELECT> dial button.
For details on operations, refer to “Menu operations” (page 38).

Summary of Contents for AK-HC5000














































































































Reviews: