– 53 –
Chapter 4 Menu Operations — Menu list
Item
Description of settings
[SIDE TONE]
Sets the side tone volume of the crane intercom (connected to the <EXT I/O> terminal).
[OFF], [
−
36dB]…[0dB]
(3 dB step)
f
Factory setting: [
−
6dB]
[ENG/PROD]
Sets the line input of the crane intercom audio.
[ENG], [PROD], [BOTH]
f
Factory setting: [ENG]
[CRANE TO CCU]
Sets whether to output the crane intercom audio to the CCU.
[OFF], [ON]
f
Factory setting: [OFF]
[CRANE INCOM
OUTPUT SETTING]
[PGM1 MIX]
Sets whether to mix the PGM1 signal with the crane intercom output.
[OFF], [ON]
f
Factory setting: [ON]
[PGM2 MIX]
Sets whether to mix the PGM2 signal with the crane intercom output.
[OFF], [ON]
f
Factory setting: [ON]
[INCOM1 MIX]
Sets whether to mix the intercom 1 signal with the crane intercom output.
[OFF], [ON]
f
Factory setting: [OFF]
[INCOM2 MIX]
([CLEAR COM MIX])
Sets whether to mix the intercom 2 signal (CLEAR COM signal for Clear-Com option) with the crane
intercom output.
[OFF], [ON]
f
Factory setting: [OFF]
[CLEAR COM]
This item is not displayed when intercom 2 is connected.
Item
Description of settings
[CLEAR COM SETTING] [INPUT LEVEL]
Sets the input volume of Clear-Com.
[
−
36dB]…[
+
12dB]
f
Factory setting: [0dB]
[CANCEL LEVEL]
Sets the input/output cancel signal level of Clear-Com.
[
−
20.0dB]…[
+
20.0dB]
(0.5 dB step)
f
Factory setting: [0.0dB]
[SIDE TONE]
Sets the side tone volume of Clear-Com.
[OFF], [
−
36dB]…[0dB]
(3 dB step)
f
Factory setting: [
−
6dB]
[CLEAR COM TO CCU]
Sets whether to output the Clear-Com audio to the CCU.
[OFF], [ON]
f
Factory setting: [ON]
[CLEAR COM OUTPUT
SETTING]
[PGM1 MIX]
Sets whether to mix the PGM1 signal with Clear-Com output.
[OFF], [ON]
f
Factory setting: [ON]
[PGM2 MIX]
Sets whether to mix the PGM2 signal with Clear-Com output.
[OFF], [ON]
f
Factory setting: [ON]
[INCOM1 MIX]
Sets whether to mix the INCOM1 signal with Clear-Com output.
[OFF], [ON]
f
Factory setting: [OFF]
[CRANE INCOM MIX]
Sets whether to mix the CRANE INCOM signal with Clear-Com output.
[OFF], [ON]
f
Factory setting: [OFF]
[EAR PHONES SETTING]
Item
Description of settings
[LCH OUTPUT SELECT]
Sets the audio signal output to the L channel of the earphones.
[INCOM1(CH1)], [INCOM2(CH1)] (for Clear-Com option: [CLEAR COM]), [INCOM1/2 MIX(CH1)] (for
Clear-Com option: [INCOM1(CH1)/CLEAR COM MIX]), [PGM1], [PGM2], [PGM1/PGM2 MIX], [MIC1],
[OFF]
f
Factory setting: [INCOM1(CH1)]
[RCH OUTPUT SELECT]
Sets the audio signal output to the R channel of the earphones.
[INCOM1(CH2)], [INCOM2(CH2)] (for Clear-Com option: [CLEAR COM]), [INCOM1/2 MIX(CH2)] (for
Clear-Com option: [INCOM1(CH2)/CLEAR COM MIX]), [PGM1], [PGM2], [PGM1/PGM2 MIX], [MIC2],
[OFF]
f
Factory setting: [INCOM1(CH2)]
[LCH MONITOR LEVEL]
Sets the monitor output level for the L channel of the earphones.
[
−
40dB]…[
+
12dB]
f
Factory setting: [0dB]
[RCH MONITOR LEVEL]
Sets the monitor output level for the R channel of the earphones.
[
−
40dB]…[
+
12dB]
f
Factory setting: [0dB]
