CAM IP SEARCH
The setting values will vary depending on the connected camera.
C 0 1 : A K - U C 4 0 0 0
C A M I P S E A R C H
SAVE
CAM IP
SEARCH
NO?
NoAssign
NoAssign
NO?
192.168.0.20
192.168.0.21
5
1 / 34
HIT
CAM No.
UCU600
MAC xx:xx:xx:xx:xx:xx
CAM No.
UCU600
MAC xx:xx:xx:xx:xx:xx
C 0 1 : A K - U C 4 0 0 0
C A M I P S E A R C H
CAM No.
NoAssign
NoAssign
NoAssign
192.168.0.23
192.168.0.24
2 / 34
CAM No.
UCU600
MAC xx:xx:xx:xx:xx:xx
192.168.0.22
UCU600
MAC xx:xx:xx:xx:xx:xx
CAM No.
UCU600
MAC xx:xx:xx:xx:xx:xx
Item
Setting details
CAM IP SEARCH
Execute this to search for cameras connected to the same network and display them from the second line.
SAVE
Select YES to reflect the setting values. If you exit the menu without selecting YES, the acquired information
will be cleared. The connection settings will remain in their original state.
HIT
Displays the number of hits displayed in the list as search results.
CAM No.
“NoAssign” is displayed as the search result for an unassigned camera.
The current camera control number is displayed for an assigned camera.
When assigning a camera control number to an unassigned camera, set the camera control number. You
can set a number within the range of 1 to 99. After setting is complete, perform a save.
- 126 -
ROP menu