![background image](http://html.mh-extra.com/html/panasonic/ak-hrp200g/ak-hrp200g_operating-instructions-manual_262582040.webp)
40
System connection diagram
(continued)
41
IP connection (AW-HE50/AW-HE60/AW-HE120)
12V
IN
LAN
RS-422
PREVIEW
CCU
SIGNAL GND
Personal computer
LAN cable
(straight cable)
LAN cable
(straight cable),
up to 100 m
External DC
power supply
AK-HRP200
Supplied AC adapter
Supplied AC adapter
AW-HE50/AW-HE60
AW-HE120
Switching hub
(100base-TX)
LAN cable
(straight cable)
1.
Connect the IP connector <LAN> of the unit and LAN
connector of the camera (AW-HE50/AW-HE60/AW-HE120)
with a LAN cable (option).
• When connecting via a switching hub (100base-TX), use a straight
cable (category 5 or better shielded cable) for the LAN cable. When
not connecting via a switching hub, use a cross cable (category 5 or
better shielded cable) for the LAN cable.
2.
When you have finished connecting the equipment, turn
on the power of the camera and turn on the external DC
power supply of the unit.
<Note>
• Up to 19 cameras (AW-HE50/AW-HE60/AW-HE120) can be controlled
from the unit.
• To use a remote camera via an IP connection, you need to configure
the settings with ROP Setup Software (accessory). Before using ROP
Setup Software, connect the unit to the personal computer with a LAN
cable.
• With IP connections, the unit can coexist with a CCU. For how to
connect to a CCU via an IP connection, refer to (→page 36).
• For details on the settings for IP connections, refer to Operations and
Settings on the supplied CD-ROM.
Summary of Contents for AK-HRP200G
Page 43: ...43 Memo ...