background image

Bitte lesen Sie zuerst diesen Hinweis! 

DEUTSCH

7

Bitte lesen Sie zuerst diesen Hinweis!

  ist die Sicherheitsinformation.

WARNUNG:

• 

Setzen Sie dieses Gerät zur Reduzierung der 

Brandgefahr weder Nässe noch Feuchtigkeit 

aus.

•  Um die Brandgefahr zu reduzieren, muss dieses 

Gerät von allen Flüssigkeiten ferngehalten 

werden. Vermeiden sie Gebrauch und Lagerung 

des Gerätes an Orten, an denen die Gefahr 

besteht, dass es mit Flüssigkeiten betropft 

oder bespritzt wird, und stellen sie keine 

Flüssigkeitsbehälter auf das Gerät.

WARNUNG:

Halten Sie Zubehörteile (Kameranummernschild) 

stets fern von Babys und Kleinkindern.

VORSICHT:

Öffnen Sie nicht das Gerät durch Abschrauben 

von Gehäuseteilen.

Im Geräteinneren befinden sich keine Teile, die 

vom Benutzer gewartet werden können.

Wartungs- und Reparaturarbeiten grundsätzlich 

autorisiertem Kundendienstpersonal überlassen.

VORSICHT:

Verwenden Sie nur das empfohlene Zubehör, 

um die Gefahr von Bränden sowie Störungen zu 

reduzieren.

VORSICHT:

Um eine ausreichende Belüftung zu gewährleisten, 

dieses Gerät nicht in einem Bücherregal, 

Einbauschrank oder an einem anderen engen 

Platz aufstellen.

Stellen Sie sicher, dass die Ventilationsöffnungen 

im Gehäuse nicht durch Vorhänge oder andere 

Materialien blockiert werden; anderenfalls besteht 

die Gefahr von Bränden aufgrund von Überhitzung.

Hergestellt von: Panasonic Corporation, Osaka, Japan

Name und Adresse des Importeurs gemäß EU-Bestimmungen:

Panasonic Marketing Europe GmbH

Panasonic Testing Centre

Winsbergring 15, 22525 Hamburg, Deutschland

Entsorgung von Altgeräten

Nur für die Europäische Union und Länder mit Recyclingsystemen

Dieses Symbol, auf den Produkten, der Verpackung und/oder den Begleitdokumenten, bedeutet, dass gebrauchte elektrische 

und elektronische Produkte nicht in den allgemeinen Hausmüll gegeben werden dürfen.  

Bitte führen Sie alte Produkte zur Behandlung, Aufarbeitung bzw. zum Recycling gemäß den gesetzlichen Bestimmungen den 

zuständigen Sammelpunkten zu.

Indem Sie diese Produkte ordnungsgemäß entsorgen, helfen Sie dabei, wertvolle Ressourcen zu schützen und eventuelle 

negative Auswirkungen auf die menschliche Gesundheit und die Umwelt zu vermeiden.  

Für mehr Informationen zu Sammlung und Recycling, wenden Sie sich bitte an Ihren örtlichen Abfallentsorgungsdienstleister, 

Händler oder Zulieferer.

Gemäß Landesvorschriften können wegen nicht ordnungsgemäßer Entsorgung dieses Abfalls Strafgelder verhängt werden.

Summary of Contents for AK-HVF100G





































Reviews: