46
Warning displays
6
Turn the jog dial button to select a menu item to configure.
7
Press the jog dial button.
The setting of the item indicated by the arrow flashes. (Fig. 3)
8
Turn the jog dial button to change the setting.
9
Press the jog dial button.
The setting is confirmed.
Pressing the <MENU> button to exit the menu screen also reflects the setting.
@
@
NOTE
t
This can be changed quickly by pressing and turning the jog dial button.
Warning displays
Content of the warning is displayed in the output from the <HD SDI OUT 2> terminal when an error is
detected while operating.
Camera warning displays
r
When AWB (automatic white balance) is executed
[AWB HIGH LIGHT NG]
Automatic white balance cannot be executed because the light amount is
excessive.
Set the light amount to an appropriate level.
[AWB LOW LIGHT NG]
Automatic white balance cannot be executed because the light amount is
insufficient.
Set the light amount to an appropriate level.
[AWB RCH OUT RANGE] The white balance convergence for red cannot be achieved.
Shoot a uniformly white object on the screen, and execute AWB.
[AWB BCH OUT RANGE] The white balance convergence for blue cannot be achieved.
Shoot a uniformly white object on the screen, and execute AWB.
r
When ABB (automatic black balance) is executed
[ABB RCH OUT RANGE]
The black balance convergence for red cannot be achieved.
Check if there are any errors in the image.
[ABB BCH OUT RANGE]
The black balance convergence for blue cannot be achieved.
Check if there are any errors in the image.
[ABB GCH OUT RANGE]
The black balance convergence for green cannot be achieved.
Check if there are any errors in the image.
[ABB NG]
The lens iris may not be closed.
r
Executing black shading
[BSHD NG]
An error has occurred with the black shading.
Check if the lens is correctly closed.
