Panasonic AS630H series, Operating Instructions Manual

English

13

  :  tune (search for the available channels)
  :  skip tuning

■

 When you select the analogue TV signal, 
select your area.

●

 When selecting [CATV/Other], press the OK button, 
and then select the Channel Plan from Indian CATV, 
South Africa, American System, American CATV or 
Japan CATV.

 3

  Select the type of [Home Screen]

 The demonstration to explain how to use [my Home 
Screen] is displayed. Confirm the demonstration by 
following the on-screen instructions, and then select the 
desired [Home Screen].

 Example: [Home Screen Selection]

 Example: [TV Home Screen]

 Auto Tuning is now complete and 
your TV is ready for viewing.

 If tuning has failed, check the connection of the network, 
RF cable, and then follow the on-screen instructions.

 Note

●

 The TV will automatically go into Standby mode 
when no operation is performed for 4 hours if [Auto 
Standby] in the Timer Menu is set to [On].

●

 The TV will automatically go into Standby mode when 
no signal is received and no operation is performed 
for 10 minutes if [No signal Power off] in the Timer 
Menu is set to [On].

●

 To retune all channels 

[Auto Tuning] in [Tuning Menu] (Setup Menu)

●

 To add the available TV signal mode later 

[Add TV Signal] in [Tuning Menu] (Setup Menu)

●

 To initialise all settings 

[Shipping Condition] in [System Menu] (Setup 
Menu)

  First time Auto 
Tuning

 Automatically sets up the TV and searches for available 
TV channels when the TV is turned on for the first time.

●

 These steps are not necessary if the setup has been 
completed by your local dealer.

●

 Please complete connections (p. 8 - 10) and settings 
(if necessary) of the connected equipment before 
starting Auto Tuning. For details of settings for 
the connected equipment, read the manual of the 
equipment.

 1

  Plug the TV into mains socket and 

turn power on

●

 Takes a few seconds to be displayed.

 2

  Select the following items

 Set up each item by following the on-screen instructions.

 Example:

 Please select your viewing environment.

 Home

 Shop

■

 How to use remote control

 Move the cursor

 Access the item / store the setting

 Return to the previous item (if available)

 Select the language
 Select [Home]

 Select [Home] viewing environment to use in your home 
environment.

●

 [Shop] is for shop display.

●

 To change viewing environment later on, you will 
need to initialise all settings by accessing Shipping 
Condition.

  Set up the network connection
  Tick the TV signal mode to tune, and then select 
[Start Auto Tuning]