AECTB6E 202110
Panasonic Corporation 2021
FEATURES
Long stroke: over travel (OT) is 2.2 mm or more on
the NO side and 2.5 mm or more on the NC side (for
pin plunger type)
Constructed so that the contact force does not
depend on the operation stroke.
High contact reliability to support low level switching
loads.
Highly effective sealing for resistance against
adverse environments
Silent operation with sliding contact
Long Stroke and Sliding Contact Construction Sealed Switches
Turquoise Stroke Switches
For detection: Seal Type Switches
TYPICAL APPLICATIONS
Automobiles (detection of door opening and closing
and shift lever position, etc.)
Electric tool and household appliances (vacuum
cleaners, air conditioners, washing machines, etc.
10.1
13.3
5.4
(Unit： mm)
ORDERING INFORMATION (PART NO.)
ASQ1
Size of mounting hole
0: Mounting hole 3 mm
standard type
1: Mounting hole 3 mm
without boss type
4: Right side pin type
(solder terminal only)
5: Left side pin type
(solder terminal only)
6: Right 2 boss type
(solder terminal only)
7: Left 2 boss type
(solder terminal only)
Contact form
1: SPDT
2: SPST-NC
(wire lead type only)
3: SPST-NO
(wire lead type only)
Actuator
0: Pin plunger
7: Leaf lever
8: Simulated
leaf lever
Terminal
2: Wire leads right side type
(SPST-NC and SPST-NO only)
3: Wire leads left side type
(SPST-NC and SPST-NO only)
4: Solder
terminal
7: P/C board right angle
terminal
8: P/C board left angle
terminal
Note) Not every combination is available. Please refer to the following table, “PRODUCT TYPES”.
COM
N.O. N.C.
COM
N.C.
COM
N.O.
5: P/C board
terminal
6: Wire leads
bottom type
industrial.panasonic.com/ac/e/
2021.10
ー 1 ー
