background image

Troubleshooting 

The

 

power

 

indicator

 

blinks

 

red.

 

‐The ID of this product is not yet registered 

in the Center Module and a wireless 
connection cannot be made. Register ID in 

the Center Module of the target. 

 

The

 

power

 

indicator

 

lights

 

red.

 

‐The battery is almost exhausted. Replace 
the battery with a charged one. 

 

Cannot

 

turn

 

on

 

the

 

headset.

 

‐The battery is exhausted.  Replace the 

battery with a charged one. 
‐The battery is not inserted correctly. 

Position the battery properly. 

 

Cannot

 

communicate

 

with

 

another

 

headset

 

or

 

the

 

speaker

 

post.

 

‐The Center Module may be turned off. Make 

sure the Center Module has power. If no 
remedy exists, consult your dealer for 

repairs.  

‐The headset ID is not registered in the 
Center Module of the target. Register ID in 

the Center Module of the target. 

‐The [S] +[P] or [S] + [T] buttons may have 
been pressed at the same time, causing the 

extended functions to start. Turn the headset 
power off and then back on. 

 

Cannot

 

hear

 

or

 

talk

 

to

 

the

 

speaker

 

post,

 

but

 

communications

 

with

 

other

 

headsets

 

are

 

working

 

properly.

 

‐The vehicle detector may be malfunctioning 

because the detector is not plugged into the 

Center Module, no power is supplied, or the 
detecting function is out of order. Check that 

the vehicle detector is plugged in and has 
power.  

 

Cannot

 

“talk”

 

or

 

“page”

 

in

 

certain

 

areas.

 

‐Radio waves cannot reach the area Remove 

any metal obstacles blocking radio waves. 
 

If no remedy exists, consult your dealer for repairs.

 

Charging 

Use the supplied charging attachment to 

charge the battery with the battery charger. 

The charging time is approximately 3 hours 
(when charged from empty to full). For 

details on the indicator during charging, 
refer to the operating instructions for the 

battery charger. 

 
When the charging attachment (accessory) is 

attached to the battery charger as shown in 
the figure below, insert the battery while 
matching the terminals

Included Accessories 

PGGX1006ZAC1 ‐ Color tips – Black 
PGGX1006ZBC1 ‐ Color Tip – Red 
PGGX1006ZCC1 ‐ Color Tip – Blue 
PGGX1006ZDC1 ‐ Color Tip – Green 
PGGX1006ZEC1 ‐ Color Tip – Yellow 
2FA1CH455P   ‐ Charging attachment 

Optional Accessories 

WX‐SB100   ‐ Battery  
         (Li‐ion 3.7 V DC, 700 mAh) 
WX‐Z3040A ‐ Battery Charger 

CONSUMABLES  

PGHG1521ZAC1 ‐ Head Pad 
         (Adjustment Slide Pad) 
PGHG1520ZAC1 ‐ Ear Pad 
PGUR1108ZAC1 ‐ Headband

 

 

PANASONICA
ATTUNE II 
HD3 HEADSET 
WX-CH455 
CHEAT SHEET

12/17/2018

 

r1.0

 

 

Reviews: