Mic LED Colors
Orange
Solid
: Listening A Lane
Orange
Flashing
: Talking A Lane
Green
Solid
: Listening B Lane
Green
Flashing
: Talking B Lane
ID Tag
Used to identify different functions
programed into headsets.
Black is install by default
Red, Blue, Green and Yellow can be installed
and are included with headset.
Adjustable Headband
Headband is adjusted to proper fit.
Talk Button Functions:
Modes:
Push
to
Talk:
Click and hold to talk.
Release button to listen.
Talk
Lock:
Click button once to talk.
Click button again to listen.
Page Button Functions:
Modes:
Push
to
Page:
Click and hold to talk.
Release button to listen.
Talk
Lock:
Click button once to talk.
Click button again to listen.
Volume Button Levels
Default:
Volume Level 1
Click
Volume
Button:
Volume Level 2
Click
Volume
Button:
Volume Level 3
Click
Volume
Button:
Volume Level 4
Click
Volume
Button:
Volume Level 5
At Volume Level 5, headset will double
beep and next button click: Volume 1
“S” Button
Double
Click:
to change lanes (when installed with the
WX-CC412 Center Module).
Voice prompt will announce what lane the
headset is currently switched too.
Click
and
hold
“S”
and
Volume
Buttons
at
the
same
time
for
2
seconds:
This will activate the Alert feature.
Headset registration
1)
Set the Center Module to “ID Registration” mode
.
Refer to the operating instructions of the Center Modul
2)
Rotate the microphone boom to turn off the power
the headset.
3)
Rotate the microphone boom while holding down th
[T] and [P] buttons to turn
on the power of the headset.
● The headset enters the ID Registration setting mode.
You will hear “Registration Mode” and the power indica
will blink orange.
4)
Press the [T] button*.
● You can hear “Connecting Center Module A” and the
lane Indicator will blink orange.
● If the Center Module is a WX
-
CC412(A), ID registration
for Lane B is automatically started, the voice message
“Connecting Center Module B” is heard from the
earphone, and the lane indicator blinks green.
● When the ID Registration succeeds, you will hear
“Registration complete”, “Headset
xx” (xx: ID number registered in the Center Module), an
the power indicator stops
blinking and stays on.
5)
When the ID registration is complete, cancel “ID
Registration” mode of the Center Module.
●
When this is done, “ID Registration” of this product is
cancelled and the power indicator turns green.
* When this unit is connected to the WX
-
C3010, its ID is
registered in the Center Module of Lane A when the [T1
button is pressed or in the Center Module of Lane B
when the [T2] button is pressed.
Center Module Search
1)
Rotate the microphone boom to turn off the power
the headset.
2)
Rotate the microphone boom while holding down th
[VOL] and [P] buttons to turn on the power of the
headset. Hold until headset lights flash.
● The headset will search until it finds a Center Module
that it has already registered with. The headset will then
reboot itself and announce headset number.
ID
Tag
Mic
LED
Adjustable
Headband
Ear
Pad
Talk
Button
Volume
Button
Page
Button
Head
Pad
