4
AU-EVA1 SETUP GUIDE
EVA1 + Android INFRA Connection
Wi-Fi INFRA connects
devices with the use of a
wireless access point. All
devices on the network will
communicate with the same
access point. This requires
a network and access point
to be set up and running.
Note:
AU-EVA1 only supports AJ-WM50 Wi-Fi dongle.
1:
Take note of the IP address.
This will be needed for Android setup.
*The IP address may be different for your camera.
2:
First connect the Android device to the same network as the camera.
Next, open EVA ROP app.
– Enter IP Address after clicking on settings as shown in the picture.
–
Exit MENU on camera and click ok, camera should connect.
– User ID and Password are
optional and only needed if one is created and added in camera
under NETWORK FUNC.
If necessary:
Default User ID:
guest (up to 31 characters)
Default Password:
auguest (6-15 characters)
