– 38 –
Chapter 3 Preparation — Mounting accessories
LCD monitor unit
Mounting the LCD monitor unit
Mount the supplied LCD monitor unit to the LCD monitor mounting section.
Fig. 1
Fig. 2
Fig. 3
Screw
1
Insert the supplied LCD monitor mounting attachment to the LCD monitor unit mounting section of the handle. (Fig. 1)
f
This can also be mounted to the accessory mounting holes at the top of the camera.
2
Tighten the supplied screw by turning clockwise.
3
Open the terminal cover of the <LCD> terminal, and connect the LCD monitor unit cable to the <LCD> terminal. (Fig. 2)
f
Connect by aligning
a
of the <LCD> terminal with
s
of the LCD monitor unit cable connection terminal.
f
Connect after confirming that
s
of the LCD monitor unit cable connection terminal is facing outward.
4
Attach the LCD monitor unit cable to the LCD monitor cable clamp. (Fig. 3)
r
Adjusting the angle of the LCD monitor
The LCD monitor can be turned vertically and horizontally to adjust to easily viewable angle.
The VIEW screen can be inverted vertically or inverted vertically and horizontally by the <MIRROR> switch allowing the mirror shooting, etc.
It is recommended to close the LCD monitor to protect the LCD monitor when the camera is not used or to be carried.
