Panasonic AV-HS410, Operating Instructions Manual

31

2. Preparations

2-2-2. Keyboard screen operations

When a name such as the name of the input signal material, 
name of the memory or name of the data to be saved on an 
memory card is to be changed, display the keyboard screen, 
and input the characters.
When the rotary encoder [F2] to [F5] that corresponds to the 
item (character input box) whose name is to be changed is 
pressed, the keyboard screen appears on the built‑in display.

Character input area

When the keyboard screen is displayed, use rotary encoders 
[F1] to [F5] to input the characters (alphanumerics and 
symbols).

[F1]: CURSOR

Turn [F1] to move the cursor inside the character input 
area.

[F2]: UP/DOWN, [F3]: LEFT/RIGHT

When selecting characters on the keyboard, turn [F2] to 
move up or down, or turn [F3] to move to the left or right.
When [F2] or [F3] is then pressed, the character selected 
is entered.
The character selected is reflected in the character input 
area.



When 

Shift

 is selected and pressed, the keyboard 

display is switched (between upper‑case letters, lower‑
case letters and symbols).

[F4]: OK

When [F4] is pressed, the name which has been input is 
entered, and reflected in the unit.
At this point, the keyboard screen is cleared, and the 
original screen is restored.

[F5]: CANCEL

When [F5] is pressed, the name which has been input is 
canceled. 
At this point, the keyboard screen is cleared, and the 
original screen is restored.

2-2-3. Menu delegation function

When the buttons listed below are double‑clicked, the 
specified menu is selected. (The menu delegation function)
The operation corresponding to the button pressed is also 
executed.

Button

Menu selected

Crosspoint area (AUX bus selector buttons)

KEY

Key menu/Adjust sub menu

When the chroma key is selected:
Chroma Key menu/Adjust sub menu

PinP1

PinP1 menu/Position sub menu

PinP2

PinP2 menu/Position sub menu

DSK

DSK menu/Adjust sub menu

Transition area

BKGD

Time menu/BKGD sub menu

KEY

Time menu/Key sub menu

WIPE

Background menu/Border sub menu

<Menu delegation setting>

This setting is used to enable (turn on) or disable (turn off) the 
menu delegation function.

1 

Press the 

s

 button to light its indicator, and display the 

Config menu.

2 

Use [F1] to display the Operate sub menu.

3 

Use [F5] to set enable or disable for the menu 
delegation function at the Delegation item.

On

Enable

Off

Disable