80
2. Input/output signal settings
2-1-9. Setting the analog composite input
signals (option)
When the analog composite input board (option) has been
connected, the analog composite input signals can be set.
1
On the Input sub menu, use [F2] to select the input to
be set using the Select item.
Refer to “2-1. Input signal settings”.
2
Use [F1] to display the Video Process sub menu.
3
Use [F2] to set the gain of the input signal (Y signal
gain) using the Gain item.
4
Use [F3] to adjust the chroma level using the Chroma
item.
(Maximum amount of variation: approx. ±3 dB)
The auto color control function is activated, and the
chroma level is kept at the value that has been set.
5
Use [F4] to adjust the pedestal level using the Ped item.
(Maximum amount of variation: approx. ±100 mV)
6
Use [F5] to adjust the hue using the Hue item.
(Maximum amount of variation: approx. ±20°)
Adjustment of Hue is possible when the system format
is 1080/59.94i, 720/59.94p and 480/59.94i.
For details on the other settings, refer to the operating
instructions of the option board.
