96
2. Input/output signal settings
2-5. Setting the multi view display
2-5-1. Setting the screen layout
The following nine options are available as split screen
layouts.
4Split
5-aSplit
5-bSplit
6-aSplit
6-bSplit
9Split
10-aSplit
10-bSplit
16Split
Display of the following signals can be assigned to sub
screens 1 to 16.
Signals that can be assigned
SDI IN1 to SDI IN8, DVI IN, IN-A1, IN-A2, IN-B1, IN-B2, CBGD1,
CBGD2, Still1V, Still1K, Still2V, Still2K, Clip1V, Clip1K, Clip2V,
Clip2K, PGM, PVW, MEM-PVW, Key Out, AUX1 to AUX4, Clock
<Display modes>
4
3
2
1
4Split
2
1
5
3
4
5-bSplit
2
1
5
3
4
5-aSplit
2
1
6
3
4
5
6-bSplit
2
1
6
5
3
4
6-aSplit
7
8
9
4
5
6
1
2
3
9Split
1
7
8
9
10
3
4
5
6
2
10-bSplit
1
3
4
5
6
7
8
9
10
2
10-aSplit
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
16Split
1
Press the
x
button to light its indicator, and display the
Multi View Display menu.
2
Use [F1] to display the MV Split sub menu.
3
Use [F2] to set the split-screen display mode using the
Split item.
4
Use [F1] to display the MV Pattern 1/4 to MV Pattern
4/4 sub menus.
5
Use [F2] to [F5] to set the names of the signals to be
displayed on the sub screens (1 to 16).
SDI IN1 to SDI IN8, DVI IN, IN-A1, IN-A2, IN-B1, IN-B2,
CBGD1, CBGD2, Still1V, Still1K, Still2V, Still2K, Clip1V,
Clip1K, Clip2V, Clip2K, PGM, PVW, MEM-PVW, Key Out,
AUX1 to AUX4, Clock
When the input signals (SDI IN1 to SDI IN8, DVI IN,
IN-A1, IN-A2, IN-B1 or IN-B2) have been selected, the
material name set using the Input menu
Name sub
menu is displayed (with up to 10 characters).
When the input signals have been selected by the AUX
buses (AUX1 to AUX4), the first four characters of the
material name is displayed inside [ ].
Display that appears when IN1 (CAM1) has been selected
by the AUX1:
AUX1[CAM1]
Display that appears when IN2 (CAMERA2) has been
selected by the AUX2:
AUX2[CAME]
When the AUX bus for which “MV” has been selected
is displayed on the sub screen of the multi view display,
the images are looped as if two mirrors were facing each
other.
