18
2. Functions in each area
2-1-1.
Crosspoint area
1
/17
2
/18
3
/19
4
/20
5
/21
6
/22
7
/23
8
/24
9
/25
10
/26
11
/27
12
/28
13
/29
14
/30
15
/31
16
/32
PGM/A
AUX
PST/B
KEY
PinP 1/2
DSK 1/2
AUX1
AUX2
AUX3
AUX4
SHIFT
SHIFT
SHIFT
CAM
MEM
1
2
3
4
5
6
KEY
MENU FUNCTION / AUX BUS DELEGATION
USER
CKEY
BKGD
PinP1
PinP2
DSK1
DSK2
TIME
CBGD
IMAGE A
IMAGE B
FMEM
SDCard
CTL
CAM
XPT
MV
IN
OUT
CONFIG
SYS
AMBER:1 / GREEN :2
PGM/A bus crosspoint buttons [PGM/A 1 to 32]
These are used to select the PGM/A bus video signals.
Buttons 1 to 32 can be selected using the [SHIFT] button.
Refer to “3-1-2. Selecting the bus using the SHIFT function”. (Operating Instructions in CD-ROM)
In the case of the flip-flop system, the main line video (PGM) signals are always selected.
When one of the crosspoint buttons (
,
,
) is held down, the name of the input material and the number of
the crosspoint button are displayed.
PST/B bus crosspoint buttons [PST/B 1 to 32]
These are used to select the PST/B bus video signals.
Buttons 1 to 32 can be selected using the [SHIFT] button.
Refer to “3-1-2. Selecting the bus using the SHIFT function”. (Operating Instructions in CD-ROM)
In the case of the flip-flop system, the images inserted next (PST) are always selected.
AUX bus selector buttons [KEY, PinP 1/2, DSK 1/2, AUX1 to AUX4]
Select the bus to be operated using the AUX bus crosspoint buttons (
).
The selected button lights.
[KEY]:
This button is used to change the AUX bus crosspoint buttons (
) into the selector buttons for the sources
of the key fill buses.
The source for the key source bus can be set using the menu displayed when the AUX bus crosspoint
buttons (
) are held down. The set source will be the same for DSK1 and DSK2.
The source can also be set from the CONFIG menu.
[PinP 1/2]:
This button is used to change the AUX bus crosspoint buttons (
) into the selector buttons for the sources
of the PinP buses.
Each time it is pressed, its target is switched between PinP1 and PinP2.
When PinP1 is selected, the button lights in amber; when PinP2 is selected, it lights in green.
[DSK 1/2]:
This button is used to change the AUX bus crosspoint buttons (
) into the selector buttons for the sources
of the DSK fill buses.
Each time it is pressed, its target is switched between DSK1 and DSK2.
When DSK1 is selected, the button lights in amber; when DSK2 is selected, it lights in green.
[AUX1] to [AUX4]:
These buttons are used to change the AUX bus crosspoint buttons (
) into the selector buttons for the
sources of the AUX buses.
The AUX bus selector buttons are also used as the menu function buttons (
!
).
