52
DVI-D input
(option)
Digital RGB:
XGA (1024
M
768), WXGA (1280
M
768), SXGA (1280
M
1024), WSXGA+ (1680
M
1050),
UXGA (1600
M
1200), WUXGA (1920
M
1200)
Vertical frequency: 60 Hz
Digital RGB: 1080/50P, 1080/59.94P
p
This board is incompatible with the HDCP (High-bandwidth Digital Content Protection).
p
Analog input signals are not supported.
4 signal lines, maximum: IN A1, IN A2, IN B1, IN B2
(When two AV-HS04M8 boards are used)
p
The DVI-I connector cable cannot be used.
p
For the DVI-D connector cable, use a cable with a length of up to 5 m (16.4 ft.).
DVI-D output
Digital RGB:
XGA (1024
M
768), WXGA (1280
M
768), SXGA (1280
M
1024), WSXGA+ (1680
M
1050),
UXGA (1600
M
1200), WUXGA (1920
M
1200)
Vertical frequency: 60 Hz
Digital RGB: 1080/50P, 1080/59.94P
(The vertical frequency is the same as that of the system format. When the
system format is 1080/23.98PsF or 24PsF, the images cannot be output.)
p
Analog output signals are not supported.
p
High-resolution multi view mode supported:
Signals are also output with a high resolution even when SD has been selected as the
system mode.
With this mode setting, MV1 is output to OUT5 and MV2 to OUT6; MV1 and MV2
cannot be output to any other outputs.
2 lines, standard: OUT5, OUT6
p
The DVI-I connector cable cannot be used.
p
For the DVI-D connector cable, use a cable with a length of up to 5 m (16.4 ft.).
Reference
input/output
In gen-lock mode:
Black burst or Tri-level Sync input signals (with loop-through)
In internal sync mode: Black burst output signals
M
2
p
Same field frequencies as those of the system formats supported
p
With the 1080/23.98PsF and 24PsF formats, only GENLOCK mode supported
p
With the 1080/23.98PsF format, black burst with 10F-ID (SMPTE318M standard met)
or TRI signals supported
Video delay time
FS OFF, U/C OFF
1 line (H)
FS ON or U/C ON
1 frame (F)
p
When the signals have passed through DVE, multi view, down-converter, DVI-IN or
DVI-OUT, a maximum delay of 1 frame is applied in each case.
5. Specifications
