141
External interfaces
Setting the GPI I/O
The user can set the functions that are to be controlled from
the GPI ports and set whether to enable the control.
1
Press the
CONF
SYS
button to light its indicator, and display
the Config menu.
2
Use [F1] to display the GPI-In Setting sub menu (or
GPI-Out Setting sub menu).
3
Use [F2] to set “On” or “Off” for the control to be
exercised from the ports using the GPI-In Enable item
(or GPI-Out Enable item).
4
Use [F3] to set the AUX bus to be used to notify the tally
using the AUX Sel item.
5
Use [F1] to display GPI-In Port 1/2 sub menu and
GPI-In Port 2/2 sub menu (or GPI-Out Port 1/5 sub
menu to GPI-Out Port 5/5 sub menu).
6
Use [F2] to [F5] to allocate the functions to be assigned
to the respective pin numbers.
Refer to “Control using the GPI Input port” and
“Output from the GPI Output port”.
p
Settings for the GPI-In Enable (or GPI-Out Enable) item
can be assigned to one of the user buttons.
Refer to “Setting the user buttons”.
