29
Preparations
List box:
1
Press [F2] to [F5] to display the list box.
2
Turn [F2] to [F5] clockwise or counterclockwise to select
the setting.
p
The setting of an item whose selected setting does
not blink will be reflected in the unit as soon as it has
been selected.
p
The setting of an item whose selected setting blinks
is reflected in the unit by pressing [F2] to [F5].
3
Press [F2] to [F5] again to close the list box.
Selector button:
When a rotary encoder [F2] to [F5] is pressed, the setting
is switched between “On” and “Off.”
Execution buttons:
When a rotary encoder [F2] to [F5] is pressed, the
corresponding function is executed.
Numeric value input box:
Turn a rotary encoder [F2] to [F5] to change the numeric
value.
When a rotary encoder [F2] to [F5] is held down, the
numeric value is returned to its initial value.
A numeric value bar is displayed and its display is linked to
the numeric value.
Inputting numeric values using the number keys
1
Press [F2] to [F5] to establish the mode in which
numeric values can be input using the number keys.
p
Use the
.
>>
button to input the decimal point.
If a numeric value has a decimal point which is not
input, it will be treated as an integer, and its decimal
places will be set to zero (“0”).
p
Press the
-/+
PAGE
button to switch the numeric value
between a positive and negative value. Each time
this button is pressed, the numeric value is switched
from positive to negative (or vice versa).
p
If the
C
UNDO
button is pressed when a numeric value
has been input, the numeric value will be returned to
the value prior to the change.
2
Input the numeric values using the number keys, and
press the [TAKE ENTER] button.
The values which have been input are entered and
reflected in the unit.
p
p
When a numeric value is input using the number keys
and a rotary encoder from [F1] to [F5] is operated, the
input value is cleared, and the numeric value prior to
input is restored.
p
p
When a numeric value outside the setting range is
input, the value is invalid and the numeric value prior
to input is restored.
Character input box:
When a rotary encoder [F2] to [F5] is pressed, the
keyboard screen is displayed.
Use rotary encoders [F1] to [F5] or positioner to input the
characters.
Refer to “Keyboard screen operations”.
