background image

27

Basic operations

(continued)

 

Freezing images during preset playback 

(FREEZE DURING)

Press the [MENU] button on the AW-RP50.

The [MENU] button lights, and the [PRESET MEMORY/
MENU] buttons become selectable.

Press the [9 (SETUP)] button in the [PRESET 
MEMORY/MENU] area.

The button lights, and the SETUP menu appears on the 
LCD panel.

Turn the F1 dial to select “FUNCTION”, then 
press the F1 dial.

Turn the F1 dial to select “FREEZE DURING”, 
then press the F1 dial.

“Off” or “On” appears on the bottom right (F2 area) of the 
LCD panel.

Turn the F2 dial to select “Off” or “On”, then 
press the F2 dial.

Off:

   Do not freeze the current preset playback images.

On:

   Freeze the current preset playback images.

 

Digital image stabilization function 

setting

Press the [MENU] button on the AW-RP50.

The [MENU] button lights, and the [PRESET MEMORY/
MENU] buttons become selectable.

Press the [9 (SETUP)] button in the [PRESET 
MEMORY/MENU] area.

The button lights, and the SETUP menu appears on the 
LCD panel.

Turn the F1 dial to select “FUNCTION”, then 
press the F1 dial.

Turn the F1 dial to select “I.S.”, then press the 
F1 dial.

“Off” or “On” appears on the bottom right (F2 area) of the 
LCD panel.

Turn the F2 dial to select “Off” or “On”, then 
press the F2 dial.

Off:

   Turn the digital image stabilization function off.

On:

   Turn the digital image stabilization function on.

Summary of Contents for aw-he40 series











































































































































Reviews: