- 1 (E) -
Setting and changing of menu items
Zebra indicator (ON, OFF)
This sets the zebra pattern display
which appears in the viewfinder.
ON:
Zebra patterns are displayed in
the viewfinder.
OFF:
Zebra patterns are not displayed
in the viewfinder.
<Note>
Even if “ON” is selected for this setting,
the zebra patterns will not be displayed
in the viewfinder if “CVBS” has been
selected as the EVF output
4
setting.
2
Level (70% to 110%)
The zebra patterns are displayed to use
as a yardstick for the brightness level.
<Note>
These settings are available when
“ON” has been selected for the Zebra
indicator
setting.
3
Safety zone (1 to 4, OFF)
This selects the type of safety zone that
is displayed in the viewfinder.
If “OFF” is selected, a safety zone will
not be displayed.
<Note>
The safety zone and the center marker
reflect the electrical positions which may
differ from the optical positions.
The inner frame and the outer frame
are approximately 90% and 95%,
respectively, of the safety zone.
4
EVF output (Y, CVBS)
This sets the signals to be output to the
viewfinder.
Y:
Brightness signals are output to
the viewfinder.
CVBS:
Color signals are output to the
viewfinder.
<Note>
The zebra pattern is not displayed in
the viewfinder when “CVBS” has been
selected.
2
3
4
Optional card settings submenu
