background image

-  (E) -

Contents

Configuration  ........................................  3

Accessories  ..........................................  3

Introduction  ...........................................  4

Characteristics  ......................................  4

Precautions for use  ..............................  4

Major operating controls and  

their functions  .................................  5

 

SDI card  ...........................................  5

 

Interface bracket  ..............................  6

Installing the SDI card  ..........................  7

Interface bracket mountings  ...............  8

 

Mounting the bracket on a tripod  .....  8

 

Mounting the camera  .......................  8

 

Mounting the viewfinder  

on a bracket ..................................  8

Connections  ..........................................  9 

 

When configuring a system  

with the remote control unit  .........  9

 

When configuring a system  

with the remote operation panel  ...  10

Setting and changing of menu items  ...  11

 

Performing the settings  ..................  11

 

Optional card settings submenu  ....  1

Appearance  .........................................  14

 

SDI card  .........................................  14

 

Interface bracket  ............................  15

Specifications  .....................................  16

Accessories

Adjuster plug (M6 

 M3)  ........................ 1

Screws (6 mm)  ....................................... 2
Screws (8 mm)  ....................................... 4

Configuration

SDI card (AW-PB506A U01)  ................... 1
Interface bracket (AW-PB506A U02)  .... 1

Summary of Contents for AW-PB506AL


















Reviews: