– 23 –
Installation work
Installation
(Be sure to ask your dealer to install the unit.)
p
When the pan-tilt head is not going to be used any longer, do not leave it in place but
be absolutely sure to dispose of it.
p
Tighten up the screws and bolts using the specified torque. If they are tightened using
too much torque, the thread ridges will be damaged, and the pan-tilt head may fall.
Conversely, if they are tightened using too little torque, the screws may come loose.
p
Use a torque driver or torque wrench in order to tighten the parts at the specified
torque.
p
There are limits on the torque range that can be specified by torque drivers and torque
wrenches. Use the specified torque values that are recommended as a reference, and
use the appropriate torque driver or torque wrench.
p
Do not use impact drivers or electrical drivers whose torque is difficult to control since
doing so may damage the screws and bolts.
