B
asi
c Op
eration
Switching the projector on/off
20 -
E
NGLISH
1. Switch the
MAIN POWER
button on.
The power indicator lights up in red.
2. Remove the lens cover from the lens.
3. Press the
POWER
button.
The power indicator lights up in green after flashing
for a while.
The
STARTUP LOGO
is displayed on the screen.
See “STARTUP LOGO” on page 38.
1. Press the
POWER
button.
The confirmation screen is displayed. It will
disappear and return to the projection after
10 seconds without any operation.
To return to the projection, press
ENTER
to select
CANCEL
or press
MENU
/
RETURN
.
2. Press
I
to select
OK
and press the
POWER
or
ENTER
button.
The power indicator lights up in orange while cooling
the lamp, then illuminates red when it is ready to
switch off the
MAIN POWER
button.
3. Switch off the
MAIN POWER
button on the back of
the projector.
Switching on the projector
POWER
indicator
NOTE:
•
• When starting up the projector, some small rattling or tinkling sound may be heard, or the display may flicker for the
characteristics of the lamp. Those are normal and do not affect the performance of the projector.
• Do not attempt to modify the lens cover which may cause burns, fire or damage to the projector.
Switching off the projector
POWER
indicator
NOTE:
• Press the
POWER
twice or for a long duration to switch the power off.
