Operating Instructions
34
Instructions for the data fields
Camera Type
Select the Network Camera type (with Pan/Tilt feature, without Pan/
Tilt feature or with zooming feature).
IP address
Enter the IP address of Network Camera.
Enter "IP address (or domain name):Port number".
(When port number is 80 [default], you do not need to enter port
number.)
•
Enter the alphanumeric characters.
Camera Name
Enter Camera Name.
•
Maximum 250 characters including a path name of a folder
•
[\], [/], [:], [.], [;], [*], [?], ["], [<],[>] and [|] are not available.
Description
Enter the information of Network Camera.
•
Maximum 128 characters
Resolution
Select
640 x 480
,
320 x 240
(default) or
160 x 120
.
Image Quality
Select
Favor Motion
,
Standard
(default) or
Favor Clarity
.
Capture Type
Select
Motion Image
or
Still Image
.
Intervals
should be set over
0.5 seconds.
•
You may not monitor or record at the specified intervals
depending on the recording situations.
Recording File
Format
Select a recording file format.
•
JPG
creates JPEG files. The number of continuous recorded
images are limited.
MJP
is recommended when recording a
motion image or still images at short intervals.
•
MJP
creates an MJP file. MJP puts continuous JPEG files
together every hour.
Recording
Select
Off
,
On
or
Motion Detect
.
Timer
Operation
Set the date of recording. Select the date and a day of the week.
If the setting time passes over midnight, check the day of start time.
•
Select
[On]
or
[Motion Detect]
for recording type. Images are
recorded when detecting motions, when selecting
[Motion
Detect]
.
Summary of Contents for BB-HNP60
Page 8: ...Operating Instructions 8 Section 1 Product Introduction ...
Page 23: ...Operating Instructions 23 Section 2 Network Camera Recorder Screen ...
Page 63: ...Operating Instructions 63 Section 3 Practical Operation ...
Page 76: ...Operating Instructions 76 Section 4 Default Setting and Troubleshooting ...
