9
PRECAUTIONS
General Safety Requirement
For Installation:
Refer all work related to the installation of the product to
qualified service personnel or system installers.
Consult an expert for help in evaluating load bearing
capacity of the installation surface and structure. If the sur-
face is not strong enough, the camera may fall down. Refer
to the product specifications for weights.
To avoid fire or personal injury:
• Do not drop metallic parts through slots.
This could permanently damage the product.
• Do not attempt to disassemble the product.
There are no user-serviceable parts inside. Panasonic
is not responsible for regulatory compliance of a disas-
sembled Panasonic product by unauthorized person-
nel. Contact qualified service personnel for mainte-
nance.
• Do not strike or shake the product.
Handle the appliance with care, or it could cause the
trouble of it.
• Do not expose nor operate the product in wet/damp
conditions.
Take immediate action if the product gets wet. Refer
servicing to qualified service personnel. Moisture could
damage the product and also cause electric shocks.
• Do not use strong or abrasive detergents when
cleaning the product.
Use soft and dry cloth to clean the product when it is
dirty. When the dirt is hard to remove, use a mild deter-
gent and wipe gently.
• Do not use the product beyond operating
requirements.
It is designed to operate properly for environment spec-
ified below:
Temperature
0 °C to 40 °C {32 °F to 104 °F}
Humidity
30 % to 80 % relative humidity, non-
condensing
Source voltage
12 V DC/24 V AC
Important notes specific to the product:
• This unit has no power switch.
Power is supplied from an external 12 V DC/24 V AC
power-supply device. Refer to service personnel for
how to turn on/off the power.
Note:
While the power is turned off, recognition and
entrance will NOT be available.
• The third-party external power supply should meet
the specifications. (Refer to p. 33.)
• Replacement part
Exchange the following parts for the same type.
F1:
K5D402BK0002
• Adopting tamper-proof structure.
Refer to service personnel for relocating or servicing
the unit.
As the unit has been designed in tamper-proof struc-
ture, buzzer sound will be activated with alarm notifica-
tion when you try to open the front cover or detach the
camera from the wall. Then, recognition will become
unavailable, the alarm notification will also be sent to
the iris server, and the stored data may be erased from
the unit.
• Use of near-infrared ray
Near-infrared ray is used when iris data are captured
by the unit. The near-infrared ray is compliant with the
radiological safety standard of IEC60825-1.
• Indication label
Refer to the indication placed on the bottom of the
product as to the indications of equipment classification
and power source, etc.
• This product is not designed to prevent theft.
The product is designed to perform roles of capturing
personal iris data, of recognizing individuals and of pro-
ducing output signals only. To ensure your
entrance/gate security, you must use the product
together with other security system or devices including
electric locks.
Panasonic is NOT RESPONSIBLE FOR ANY CRIME OR
TROUBLE CAUSED BY USING THIS UNIT.
• In some cases, recognition or enrollment doesn’t
work properly.
It could be invalid in recognition or enrollment when the
camera has difficulty in getting iris information due to
dirt in front of lens, reflection of glasses or insufficiency
of physical requirement.
• Iris data is a nature of privacy.
Take enough care not to leak the data out of the iris
server. It is also recommended that you should get an
agreement from a person to register his or her data.
