13
•
You can set FUNCTION display in the menu.
•
When “FUNCTION DISPLAY” (
J
page 22) is “ON”
and either [FUNCTION1] or [FUNCTION5] is
pressed, the unit displays the status of the
FUNCTION item set.
•
The display disappears if remains idle for 2 seconds.
•
The operational status is displayed in “XXXXX” (
J
page 23 “Operation items displayed when a
FUNCTION button is used”).
•
When the signal is SDI, the audio level is displayed
on the white skeleton bar meter.
•
You can switch the level display on and off, and set
the number of displayed channels using the menu.
•
The 0 dB line and channel display can be switched
on and off from the menu.
•
This is displayed when the menu is used.
•
The display disappears if remains idle for 2 minutes.
•
The display position can be changed (
J
page 21
“MENU POSITION”).
Function display
F1:MARKER
F2:WFM
F3:LEVEL METER
F4:PIXEL TO PIXEL
F5:PIXEL POS.
XXXXX
Audio level meter display
1
1
3
3
5
5
7
7
2
2
4
4
6
6
8
8
Level
display
0 dB
line
Channel
display
Menu display
MENU
FUNCTION
HOURMETER
[MAIN MENU]
Displays the operation explanation for the
menu button.
How to Use the On Screen Menu
(continued)
