1 Main Unit
1.1 Camera Adaptor (BY-HPE11R)
Front view
A
B
C
D
E
A
Indicator
Displays the status of the camera adaptor (see
page 7).
B
PoE switch
Turns the PoE function ON/OFF. The default
setting is [ON].
IMPORTANT
•
When using the camera adaptor’s PoE
function to supply power to a network
camera, set the PoE switch to [ON].
When not using the PoE function (when
powering the network camera with an
AC adaptor), set it to [OFF].
•
The PoE function cannot be used for
connections over 500 m (1,640 feet 5
inches). Set the PoE switch to [OFF].
C
BNC connector
Connects the camera adaptor to the center
adaptor with a coaxial cable (see
3.2 Connections in the Installation Guide).
D
Network connector
Connects the camera adaptor to a network
camera with a LAN cable (see
3.2 Connections in the Installation Guide).
E
INITIAL SET button
Used to reset the camera adaptor to its factory
default settings (see page 8).
4
Operating Instructions
1 Main Unit
