10
Setting up the Scanner
Setting and removing the feed tray
Before using the scanner, follow the steps below to set the feed tray.
1
Adjust the document guides to the
width of A5 paper (
), and insert the
feed tray into the scanner (
) as
shown in the illustration.
2
Push the right (
) and left (
)
sides of the feed tray in that order until
the feed tray locks in place.
When removing the feed tray, lift it up
to unlock, and then pull the left (
)
and right (
) sides out of the
scanner in that order.
3
Pull out the feed tray extension in the
direction of the arrow shown in the
illustration.
A
B
A
B
A
B
A
B
B
A
