21
Before making the settings for the wireless display, check the following server set-
tings.
z
Is the remote desktop allowed to use?
z
IP address and subnet mask (if the name server is inside the network, use the
server name instead.)
z
User name and password
6
Make the network setting.
When making connections with a LAN
z
For the following operation, make
sure the LAN is enabled.
Tap [ETHERNET1], and then tap
[File] - [Enable].
The icon will change from
to
.
When making connections with a wire-
less LAN
A
Double-tap [ETHERNET1].
A
Double-tap [WIRELESS LAN1].
B
Tap the [IP address] tab, and set an IP address and subnet mask.
If DHCP is available on the network
If DHCP is not available on the network
Select [Obtain an IP address via
DHCP].
Select [Specify an IP address], and
enter the IP address, subnet mask and
if necessary, default gateway.
C
Tap [OK].
z
When making connections with a wireless LAN
A
Double-tap
on the desktop, and then tap [Wireless LAN].
B
Tap the [Wireless Information] tab, and then tap the access point from the
list.
Now, select settings as follows according to your own network environ-
ment.
C
Tap [Connect].
CF-08.book 21 ページ ２００６年４月６日 木曜日 午後６時３８分
