7-4
7.1.8.
Removing the Speaker
Figure 7
1. Remove the LCD Lamp
2. Remove the four Screws<M>, and remove the LAN Heat
Plate, Speaker Angle and the Speaker.
3. Remove the two Screws<N>, and remove the Heat Pipe
Unit Bottom.
4. Remove the four Screws<O>, and remove the MP Eject
Lever.
5. Remove the Screw<P>, and remove the MP Eject
BOUSUI Plate and MP Eject Slide Ass’y.
Screws <M>: D4NLT
Screws <N>: DXYN+J6FNL
Screws <O>: F5NLT
Screw <P>: D4NLT
7.1.9.
Removing the Wireless Module and
SD PCB
Figure 8
1. Disconnect the Cable from Connector (CN2).
2. Remove the Wireless Module.
3. Remove the MINI PCI Protector Sheet and the CD Edge
Sheet.
4. Remove the three Screws<Q>.
5. Disconnect the Cable from Connector (CN
56
).
6. Remove the SD PCB.
Screws <Q>: DFHE5025XA
<O>
<P>
<N>
<N>
<M>
<O>
<O>
<O>
<M>
<M>
<M>
MP Eject
Lever
MP Eject
BOUSUI
Plate
LAN Heat
Plate
Heat Pipe Unit
Bottom
MP Eject Slide
Ass’y
Speaker
Speaker
Angle
Bottom Cover
LCD Lamp Sheet
Coil Cooling Sheet
MP Eject
Spring
to Connector
(CN2)
to Connector
(CN952)
Wireless Module
MINI PCI Protector
Sheet
CD Edge Sheet
Main PCB
Connector CN2
Connector CN???
to Connector
(CN
56
)
SD PCB
<Q>
<Q>
<Q>
