16
Computer Diagnosis
List of Error Codes
If a problem occurs with your hardware, and [POST Start up Error(s)] is displayed along with
the error code(s), follow the on-screen instructions.
Setup:
Setup Utility (
"Setup Utility"
) is started. Run [Load Default Settings (PnP)].
Rerun the Setup Utility to input the appropriate operating environment settings.
Exit:
Ignore the error message(s), and restart the computer.
1
Using the Self-diagnosis Program
Follow the procedure below to check whether each part of your computer is operating properly.
062
Boot failure--default configuration used
Default configuration in use
101
System Board Failure
Interrupt controller failure
102
System Board Failure
Timer 2 test failure
106
System Board Failure
Diskette controller failure
114
Adapter ROM Error
Adapter ROM checksum error
151
System Board Failure
Real-time clock failure
161
Bad CMOS Battery
Dead battery
162
Configuration Change Has Occurred
Configuration error
162
Configuration Error
CMOS checksum error
163
Date and Time Incorrect
Real-time clock is not updating
173
Configuration Change Has Occurred
ROM configuration has changed
201
Memory Size Error
Memory size/data error
301
Keyboard Error
Keyboard failure
303
Keyboard Error
Keyboard controller failure
604
Diskette Drive Error
Diskette drive 0 failure
605
Diskette Drive Error
Diskette unlocked problem
1780
Hard Disk Error
Fixed disk 0 failure
1800
PCI Error
No more IRQs available
1801
PCI Error
No more room for optional ROM
1802
PCI Error
No more I/O space available
1803
PCI Error
No more memory (above 1 MB) available
1804
PCI Error
No more memory (below 1 MB) available
1805
PCI Error
Checksum error or 0 size optional ROM
1962
An operating system could not be found
8603
Pointing Device Error
Pointing device failure
I9990301
Hard disk failure
I9990305
An operating system could not be found
Code
Description
Follow the messages on the screen.
At the MS-DOS prompt (A:\WINDOWS\COMMAND>), input the
following:
diag45 Enter
Select [1] from the menu
To run the program, insert the FIRSTAID FD
(
page 9)
you
created into the floppy disk drive, then turn your computer
on
2
3
Windows 95
Summary of Contents for CF-45 Series
Page 30: ...MEMO...
Page 31: ......