20
Device Manager 1
14
In [Start] - [Settings] - [Control Panel] - [System] - [Device
Manager], select [PCIC or compatible PCMCIA control-
ler] in [PCMCIA socket]. Remove the check for [Dis-
able in this hardware profile] in [Properties] - [Gen-
eral] and then press [OK].
15
Press [Next] at the display for the [Display Driver Wiz-
ard for PC Cards (PCMCIA)], press [Next] again and
then press [Finish].
16
When the message appears asking whether to reboot
the computer, select [No].
17
Check [View devices by connection] at [Device Manager]
and select [PCI bus] in [Plug and Play BIOS], press [Remove],
then press [OK]. The display will ask you to restart Win-
dows, press [Yes]. Rebooting will be done automatically. If
the computer asks you to insert the Windows 95 CD-ROM,
press [OK]. Input [c:\cabs], then press [OK].
Then, when the [Version Conflict] appears, select [Yes].
18
Press [Next] at the [Update Device Driver Wizard of PCI
Universal Serial Bus] and [Finish].
19
Press [Next] at the [Update Device Driver Wizard of Stan-
dard PCI Graphics Adapter (VGA)] and [Finish]. The dis-
play will ask you to restart Windows, press [Yes]. (at times,
the message may appear a few times)
Sound driver
20
In [Control Panel] - [System] -[Device Manager],
for each item in [Sound, video and game controller],
press [Remove] to delete it, then press [OK] to con-
firm the deletion.
21
Press [Refresh] and press [Next] at the [Update Device
Driver Wizard of Unknown Devices].
22
Select [Other Locations], input [c:\util\drivers\sound],
then press [OK].
23
At the [Update Device Driver Wizard of YAMAHA
OPL3-SAx], press [Finish].
Video Driver
26
Delete the check mark
for [When powered by AC
power] and [When powered by batteries] in [Start] -
[Settings] - [Control Panel] - [Power] - [Disk Drives],
then press [OK].
Power Management
Device Manager 2
27
Add the check mark
for [DMA] in [Control Panel]
- [System] - [Device Manager] - [CDROM] - [TEAC
CD-220EA] - [Settings].
28
Set [L:] for [Reserved drive letters], then press [OK].
29
Add the check mark
for [DMA] in [Device Man-
ager] - [Disk drives] - [GENERIC IDE DISK
TYPE**] - [Settings], then press [OK].
30
Set [Mobile or docking system] in [System] - [Perfor-
mance] - [File System] - [Hard Disk] - [Typical role of
this machine], then press [OK].
31
At the [System Properties], press [Close]. The display
will ask you to restart Windows, then press [Yes].
Display Driver
32
Select [Super VGA 1024 X 768] for [Models] in [Con-
trol Panel] - [Display] - [Settings] - [Advanced Proper-
ties] - [Monitor] - [Change], then press [OK].
33
Confirm that there is a check mark for [Automatically
detect Plug & Play monitor] in [Options] for the [Moni-
tor], and then press [Close].
34
Set [High Color (16 bit)] for the [Color palette], set
[800 by 600 pixels] for the [Desktop area] and then
press [OK].
• When [Compatibility Warning] is displayed, press
[OK].
35
Select [Control Panel] - [OPL3-SAx Config], increase
both the Treble and Bass in [Tone Control] by two or-
ders and then press [OK].
36
Select
on the taskbar, set the maximum volume.
37
Decrease the volume by pressing
Fn + F5
twice.
Tone and Volume adjustment
12
In [Start] - [Run], input [c:\install.bat], then press [OK].
Rebooting will be done automatically.
It may take several minutes to reboot the computer.
13
In [Start] - [Programs] - [Windows Explorer], delete
the "c:\install.bat" and "c:\install.pif" files.
System setup
24
In [Device Manager] - [Display adapters] - [Standard
PCI Graphics Adapter (VGA)] - [Driver] - [Update
Driver], select [Yes (Recommended).], then press
[Next].
25
Select [Other Locations], input [c:\util\drivers\video],
press [OK], then press [Finish]. The display will ask
you to restart Windows; remove the floppy disk and
press [Yes].
Reinstalling Software
Summary of Contents for CF-45 Series
Page 30: ...MEMO...
Page 31: ......
