26
T
ro
u
b
leshooting
Dealing with Problems (Summary)
Windows cannot be shut
down or restarted
Shutting down
If a USB device is connected, try removing it.
Others
Press
Ctrl
+
Shift
+
Esc
to open Task Manager and close the software application
which is not responding.
After shutting down by pressing the power switch for more than four seconds, press the
power switch to power on and open the application again.
If the program no longer works normally, delete the program using the following proce-
dure. Then reinstall the program.
Windows 2000
: [Start] - [Settings] - [Control Panel] - [Add/Remove Programs]
Windows XP
: [start] - [Control Panel] - [Add or Remove Programs]
No response
Is Acrobat Reader installed?
If Acrobat Reader is not installed, run the following
*
1
in [Start]
*
2
- [Run] to reinstall the
program. When installing the program, do not change the installation destination folder. If
the destination folder is changed, the Reference Manual cannot be opened from [Start]
*
2
menu.
*
1
<CF-50A******/CF-50B******>: [c:\util\reader\ar505enu.exe]
<CF-50E******/CF-50G******>: [c:\util\reader\m\acroreader51_enu_full.exe]
*
2
Windows XP
: [start]
Reference Manual
The Reference Manual is
not displayed
If the CD drive vibrates ex-
cessively or is noisy
Disk Operations
Is the disc bent or labeled?
Check to see if the disc is inserted correctly, and check that the disc is in good condition.
If the disc is good and inserted correctly, set [CD Drive Speed] to [Low] in the Setup
Utility. (
“Setup Utility”)