15
G
et
tin
g
St
ar
te
d
Opening the Display
A
1
2
A
Push the top of the latch (A) to release it.
B
Lift up the display to open.
Setting up the computer
1 Insert the battery pack. (
è
page 14)
l
Do not touch the terminals of the battery pack and the computer. Doing so can
make the terminals dirty or damaged, and may cause malfunction of the battery
pack and the computer.
l
Be sure to attach the cover for use.
2 Connect your computer to a power outlet.
The battery charging starts automatically.
CAUTION
l
Do not disconnect the AC adaptor and do not switch the wireless switch to on
until the first-time operation procedure is completed.
l
When using the computer for the first time, do not connect any peripheral device
except the battery pack and AC adaptor.
l
Handling the AC adaptor
Problems such as sudden voltage drops may arise during periods of thunder
and lightning. Since this could adversely affect your computer, an uninterrupt-
ible power source (UPS) is highly recommended unless running from the battery
pack alone.
3 Turn on the computer.
A
Confirm the wireless switch (
è
page 13) is OFF.
B
Press and hold the power switch (
è
page 12) until the power indicator (
è
page 12) lights.
CAUTION
l
Do not press the power switch repeatedly.
l
The computer will be forcibly turned off if you press and hold the power switch
for four seconds or longer.
l
Once you turn off the computer, wait for ten seconds or more before you turn on
the computer again.
l
Do not perform the following operation until the drive indicator turns off.
Connecting or disconnecting the AC adaptor
Pressing the power switch
Touching the keyboard, touch pad, touchscreen <only for model with touch-
screen> or external mouse
Closing the display
Turn on/off the wireless switch
l
When the CPU temperature is high, the computer may not start up to prevent
overheating of the CPU. Wait until the computer cools down, and then turn the
power on again. If the computer does not power on even after cooling down,
contact Panasonic Technical Support (
è
pages 37 - 41).
l
Any changes from the default setting of the Setup Utility must not be made until
the First-time Operation is completed.
CF-53mk3(DFQW5800ZAT)_OI_US.indb 15
2013/06/12 12:56:06