35
Writing to CD/DVD
1
Double-click
(B’s Recorder main window) on the desktop.
Alternatively you can click
(Start) - [All Programs] - [B.H.A] - [B’s Recorder GOLD9] - [B’s Recorder GOLD9]
(B’s Recorder main window) / [TaskGate] (launcher window).
CAUTION
Be sure to shut down B’s Recorder before you log off Windows.
Otherwise B’s Recorder may not start normally when you log on to Windows next time. In this case, restart the computer.
To access the online manual
A
Click
(Start) - [All Programs] - [B.H.A] - [B’s Recorder GOLD9] - [Manuals] - [User Manual] (user’s manual)
/ [TaskGate] (TaskGate manual).
You can use B’s Recorder to create a CD/DVD that will allow you to boot the system from the CD/DVD drive.
Create the CD/DVD using the following procedure.
For further information, refer to the online manual for B’s Recorder.
1
Run B’s Recorder (above).
2
Set a new disc in the CD/DVD drive.
3
Register the data to be used for booting in the Data well.
4
Double-click [01 Data (Mode1)] in [Track Type].
5
Click [Track Information] at the [Track Properties] screen, and click [Create from standard
bootable disk image] under [Bootable CD/DVD].
6
Click [OK], and click [Record].
7
Click [Start].
Running B’s Recorder
Using B’s Recorder to Create a CD/DVD for Booting the System
