28
Us
efu
l In
fo
rm
ati
on
Installing Software
7
Click [Next] and click [YES].
Click [Reinstall Windows] and click [Next].
8
At the License Agreement screen, click [Yes, I agree to the provisions
above and wish to continue!] and click [Next].
9
Click [Next].
If the option is displayed, select the setting and click [Next].
l
[Reinstall Windows to the System Disk to factory default.]
Select this option when you want to install Windows to the factory default. After instal-
lation, you can create a new partition. For how to create a new partition, refer to “To
change the partition structure” (
è
page 19).
l
[Reinstall to the OS related partitions.]
*1
Select this option when the hard disk has already been divided into several partitions.
For how to create a new partition, refer to “To change the partition structure” (
è
page 19).
You can keep the partition structure.
*1
This does not appear if Windows cannot be installed to the recovery partition and the area us-
able by Windows.
10
At the confirmation message, click [YES].
11
<For localized OS model>
Select OS (32bit or 64bit) and click [OK].
<For MUI OS model>
Select language and system type (32bit or 64bit) and click [OK].
At the confirmation message, click [OK].
To cancel the recovery procedure, click [CANCEL], and click the
mark that appears
at the top right corner of the screen.
12 At the confirmation message, click [YES].
Installation starts according to the instructions on the screen. (It will take approximately 20
minutes.)
l
Do not interrupt installation, for example by turning off the computer or performing other
operation.
Otherwise installation may become unavailable as Windows may not start up or the
data may be corrupted.
13 When Ending process screen is displayed, click [OK] to turn off the
computer.
14 Turn on the computer.
l
If the password is requested, enter the Supervisor Password.
15 Perform the “First-time Operation”, starting from step 6, “Setup Win-
dows” (
è
page 17).
NOTE
l
The date and time, and the time zone may not be correct. Be sure to set them
correctly.
16 Start the Setup Utility and change the settings as necessary.
17 Perform Windows Update.
18
Clear TPM (
è
page 27).
CF-LX3mk3(CPE02865ZA)_OI_M.indb 28
2014/06/26 16:42:04
