background image

23

T

ro

u

b

leshooting

Press   

Ctrl

   +   

Alt

   +   

Del

   to open Task Manager and close the software application

which is not responding.
After cutting the power by sliding the power switch for more than four seconds, slide the
power switch to power on and open the application again.
If the program no longer works normally, delete the program using the following menu.
Then reinstall the program.

Windows 2000

: [Control Panel] - [Add/Remove Programs]

Windows XP

: [Control Panel] - [Add or Remove Programs]

  

Windows XP

When switching to a different user with the Fast User Switching function, some applica-
tions may not work properly.  In this case, log off then log on with administrator authority
again and try the operation once more.

Computer hangs

 Others

Is Acrobat Reader installed?
If Acrobat Reader is not installed, run [c:\util\reader\ar505enu.exe] in [Start] - [Run] to
reinstall the program.  When installing the program, do not change the installation destina-
tion folder.  If the destination folder is changed, the Reference Manual cannot be opened
from the [Start] menu.

 Reference Manual

The  Reference  Manual  is
not displayed

The red indicator lights.
Repeated  beeping  sound
while the computer is in use.

The red indicator blinks

The orange indicator blinks

The green indicator blinks

The battery indicator blinks
green  and  orange  alter-
nately

The battery level is low.  Save your data and power off your computer.
After connecting the AC adaptor or replacing the battery pack with a fully charged one, turn
your computer on.

The battery pack or recharging function may be defective.  Quickly remove the battery
pack and disconnect the AC adaptor, then connect them again.
If the problem persists, contact Panasonic Technical Support.

Unable to charge because of an improper temperature range. (

 page 6)

Battery pack is discharging to 65% or below in high temperature mode.

Warming up the system to prevent hard disk drive malfunctions at low temperature.

 Battery Indicator

Windows  cannot  be  shut
down or restarted

 Shutting down

Do not shut down Windows during music playback.
If a USB device is connected, try removing it.

Some applications do not
work properly

When switching to a different user with the Fast User Switching function, the following
problems may occur.
• Some applications may not work properly (for example, PDF files may not be printed

properly).

• Key combinations with   

Fn

   may not work.

• It may not be possible to set the settings of the display.
• A serial mouse may not work.
If any of the above occur, log on with the administrator authority again, not using the Fast
User Switching function, and try the operation once more.

 Fast User Switching Function

Windows XP

Summary of Contents for CF-M34 Series

































Reviews: