23
Battery Power
In standby, do not remove/replace the battery pack. Otherwise your data will be lost and the computer may be dam-
aged.
1
Turn off the computer.
Do not use the standby function.
2
Turn your computer over and remove/insert the battery pack.
To remove
A
Slide the left latch (A) to the unlocked position (
).
B
Slide and hold the right latch (B) to the unlocked position (
), and hold the
center of the battery pack and push out in parallel with the bottom surface of
the computer.
To insert
A
Slide the left latch (A) to the unlocked position (
).
B
Insert the battery pack in the correct direction until it securely fits the
connector.
C
Slide the left latch (A) to the locked position (
).
CAUTION
Make sure the latch is securely locked, otherwise the battery pack may fall when you carry the computer.
Do not remove the battery pack forcibly when the latch is locked. Doing so may damage the battery pack.
Do not apply pressure from the top of the closed display when the battery pack has been removed. Doing so may
damage the LCD.
