Page 46
HOW TO SEE DESCRIPTION FOR OPERATION
The description depends on each page, but the basic structure is as follows.
1-1-1
Starting Production
1. Press
Production
.
• “Return to origin” for all axes are carried out.
MARKS USED IN THIS MANUAL
In this manual, the following mark are used for description.
T i t l e
T i t l e
Actual operation
Actual operation
Supplementary description
Supplementary description
Operation step number
Operation step number
: Shows operation flow.
: Shows a reference item.
: Shows the operation for engineers.
:Shows the operation for operators.
: Shows pressing a key on the touch
panel.
: Means pressing
UNLOCK
and then
START
on the operating panel within
2 seconds.
: Means pressing B key while
holding A key.
UNLOCK
START
A
B
+
Engineer
Return
Operator
444C-E-XXA00-A05-01