background image

Cables are available from your dealer or electronic supply house.
Before you purchase any cables, be sure you know what type of output and input con-
nectors your various components require.
Also determine the length of cable you’ll need.

AC Power Supply Cord

FCC  INFORMATION

To prevent electric shock, match wide blade of plug to wide slot of AC
outlet and fully insert. Do not use this (polarized) plug with a recep-
tacle or other outlet unless the blade can be fully inserted to prevent
blade exposure.

CAUTION:

Do not place this unit upside down or in a vertical position.

Do not install and use this unit upside down.
Do not install and use this unit standing on its side.

Care and Cleaning

Turn Digital CATV Terminal Off

F

or Digital CATV Terminal, avoid excessive moisture and wipe dry.

Avoid bumping or scraping the Digital CATV Terminal.

Remote Control

For Remote Control, use a soft cloth dampened with water or a mild detergent solution.
Avoid excessive moisture and wipe dry.
Do not use benzene, thinner or other petroleum based products.

This product incorporates copyright protection technology thatb is protected by U.S.
patents and other intellectual property rights.
Use of this copyright protection technology must be authorized by Macrovision Corpo-
ration, and is intended for home and other limited viewing uses only unless otherwise
autthorized by Macrovision. Reverse engineering or disassembly is prohibited.
U.S. Patents Nos. 4,631,603; 4,577,216; 4,819,098; 4,907,093; 6,381,747; and
6,516,132

FCC STATEMENT

Move the Digital CATV Terminal away from equipment receiving inter-
ference.

Plug the Digital CATV Terminal into a different wall outlet so the Digi-
tal CATV Terminal and equipment receiving the interference are on
different branch circuits.

If these measures do not eliminate interference, please consult your dealer or an expe-
rienced radio/television techni-cian for assistance.

FCC  CAUTION:

Pursuant to 47CFR, Part 15.21 of the FCC rules, any changes or modifi-
cations to this Digital CATV Terminal not expressly approved by Matsushita
Electric Corporation of America could cause harmful interference and would
void the user’s authority to operate this device.

FCC Declaration of Conformity

PANASONIC  CONSUMER  ELECTRONICS  COMPANY

Responsible party:
Matsushita Electric Corporation of America
One Panasonic Way
Secaucus, NJ 07094
U.S.A.

Telephone Number: 1-888-726-2377
(9 a.m.-9 p.m., Mon-Fri, EST)
(10 a.m.-7 p.m., Sat-Sun, EST) or

E-MAIL: consumerproducts@panasonic.com

This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received,including interfer-

ence that may cause undesired operation.

Radio Interference

This equipment has been tested and found to comply with the limit for a Class B Digital
Device in accordance with the specifications in Part 15 of FCC Rules. The rules are
designed to provide reasonable protection against radio and television interference in a
residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that in-
terference will not occur in a particular installation.
If this equipment does cause interference to radio or televisions reception (which you
can determine by turning the equipment off and on), try to correct the interference by
one or more of the following measures.

Reposition or relocate the receiving antenna for the radio or televi-
sion that is “receiving” the interference.
Change the position of the Digital CATV Terminal with respect to the
radio or television equipment that is receiving interference.

Trademark acknowledgements
    Manufactured under license from Dolby Laboratories.
    “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
    "TVPASS  CARD" is a trademark of MOTOROLA  CORPORATION.
All other trademarks are the property of the various trademark owners.

Summary of Contents for Comcast TZ-PCD3000









Reviews: