Audio Settings
[VOL]
(Volume)
selects a value in the audio menu.
(PUSH SEL)
(Push to select)
selects items in the audio menu.
[DISP]
(Display)
exits from the audio menu.
Audio menu
1
Press
[VOL] (PUSH SEL)
to display the audio menu display.
Note:
If no operation takes place for more than 7 seconds in the audio menu (2 seconds in Main volume adjustment), the
display returns to the regular mode.
2
Press
[VOL] (PUSH SEL)
to select a mode
to be adjusted.
3
Turn
[VOL]
clockwise or counterclockwise
to adjust.
Volume
(Setting Range: 0 to 40, Default: 18)
: Up
: Down
Bass
(Setting Range: –12 dB to +12 dB by 2 dB,
Default: 0 dB)
: Increased
: Decreased
Treble
(Setting Range: –12 dB to +12 dB by 2 dB,
Default: 0 dB)
: Increased
: Decreased
Balance
(Setting Range: 15 levels each, Default CNT (centre))
: Right enhanced
: Left enhanced
Fader
(Setting Range: 15 levels each, Default CNT (centre))
: Front enhanced
: Rear enhanced
Notes:
• If the fader is set to front, the pre-amp. output (rear) is decreased.
• For further information on SQ (Sound Quality) settings, refer to General.
•
Settings of SQ, bass and treble are infl uenced one another. If such an infl uence causes distortion to the audio signal, readjust
bass/treble or volume.