39
1
E
N
G
L
I
S
H
CQ-C5303N
38
■
Common (continued)
The safety device works.
a
Consult your dealer, or your nearest Panasonic Service Centre.
The power of the unit
fails unintentionally.
The plus and minus terminals at right and left channels of speakers are con-
nected reversely.
a
Perform the speaker wiring in accordance with the wiring diagram.
The sound field is not
clear in the stereo
mode. Central sound is
not settled.
The speaker wiring is reversed between right and left.
a
Perform the speaker wiring in accordance with the wiring diagram.
The speaker channels
are reversed between
right and left.
Balance/fader setting is not appropriate.
a
Readjust Balance/fader.
There is a break, a short circuit, poor contact or wrong wiring regarding the
speaker wiring.
a
Check the speaker wiring.
No sound from speak-
er(s)
Problem
Possible cause
a
Possible solution
■
Radio
The contact of the battery lead is poor, or the battery lead is not always pow-
ered.
a
Make sure that the battery lead is connected securely, and preset sta-
tions again.
Preset stations cannot
be stored.
The number of receivable stations is less than 6.
a
Move to an area where receivable stations number is maximum, and try
presetting.
The number of auto
preset stations is less
than 6.
The LOCAL mode is active.
a
Cancel the LOCAL mode.
Only strong signal sta-
tions can be received.
The MONO mode is active.
a
Cancel the MONO mode.
FM Stereo broadcast is
received only in mono.
Antenna installation or wiring of antenna cable is faulty.
a
Check whether the antenna mounting position and its wiring are correct.
In addition, check to see whether the antenna ground is securely con-
nected to the chassis.
No power is supplied to the antenna amplifier (when using a film antenna,
etc.).
a
Check the wiring of the antenna battery lead.
Poor reception or
noise
Problem
Possible cause
a
Possible solution