E
N
G
L
I
S
H
26
CQ-DF801/DFX701/DF601U
35
E
N
G
L
I
S
H
25
CQ-DF801/DFX701/DF601U
34
Electrical Connections
❐
Wiring Diagram
No.
Item
Q’ty
6
Power connector
1
Cautions:
≥
This product is designed to operate of a 12 V, negative ground battery system.
≥
To prevent damage to the unit, be sure to follow the connection diagram below.
≥
Remove approx.
1
⁄
4
z
(5 mm) of protective covering from the ends of the leads before connecting.
≥
Do not insert the power connector into the unit until the wiring is completed.
≥
Be sure to insulate any exposed wires from a possible short-circuit from the car chassis. Bundle all cables
and keep cable terminals free from touching any metal parts.
≥
Remember, if your car has a drive computer or a navigation computer, the data of its memory may be
erased when the battery terminals are disconnected.
Accessory used for wiring
Note:
≥
Insulate the dual CD changer control lead with
vinyl tape when you do not connect it.
Antenna control lead
To the auto antenna control
power lead of the car. (Max. 500 mA)
Dual CD changer control lead
External amplifier control power lead
To an external amplifier.
ACC power lead
To ACC power,
_
12 V DC.
Battery lead
To the battery, continuous
_
12 V DC.
Ground lead
To a clean, bare metallic part of the car chassis.
(Blue)
(Brown/white stripe)
(Blue/white stripe)
(Red)
Registor (1 k
≠
)
(Yellow)
Fuse (15 A)
(Black)
+
-
(Violet)
(Violet/black stripe)
(Right)
REAR SP
+
-
Rear speaker lead
(Green/black stripe)
(Green)
(Left)
+
-
(Gray)
(Gray/black stripe)
(Right)
+
-
Front speaker lead
(White/black stripe)
(White)
(Left)
To front sepaker
To rear sepaker
6
Power connector
CQ-DF801U
Antenna
(L) (White)
(R) (Red)
CD changer input cord
CD changer control connector
ACC
BATTERY 15 A
FRONT SP
CH•C-IN
SUB•W
REAR
(White)
(Red)
(MONO)
(L) (White)
(R) (Red)
(L) (White)
(R) (Red)
(L) (White)
(R) (Red)
Subwoofer cord
Preout cord (Rear)
Preout cord (Front)
AUX input cord
AUX-IN
FRONT
DC/DC converter
Only for CQ-DF801U
