Adjust the Speaker Delay Times
Set a delay for the output from center and surround speakers so that the sound from the
other speakers reaches the listening position at the same time as the front speakers.
Combining the Speaker Output
When listening to Dolby Digital encoded material (the “
Î
DIGITAL” indicator will
light), the signals for each speaker channel can be combined and output as stereo.
(Down Mix)
Adjust the Speaker Output Levels
Using a test signal, adjust the audio output of each speaker so that the volume
level from every speaker sounds equal. (Adjustable range: 0 to
`
12 dB)
E
N
G
L
I
S
H
11
E
N
G
L
I
S
H
12
CQ-DVR7000U
CQ-DVR7000U
30
31
Setting Up the Speakers (continued)
Indicates pressing a button.
8 Down Mix
Notes:
≥
OFF is recommended as the setting when surround speakers and center speaker are used.
≥
In the PRIVATE MODE (
➡
page 60), the disc will be played with Down Mix at "ON"
regardless of the setting which has been selected.
5-6 Speaker
Delay
Make settings
3
1. 0.0 msec
2. 1.3 msec
3. 2.6 msec
4. 3.9 msec
5. 5.3 msec
6. Return
<Speaker Delay>
Select
Speaker Delay
1. 0.0 msec
2. 5.3 msec
3. 10.6 msec
4. 15.9 msec
5. Return
<Speaker Delay>
Select
Speaker Delay
Center
Speaker
Surround
Speaker
Make settings
3
1. ON
2. OFF
3. Return
<Down Mix>
Select
Down Mix
1. ON
: Down Mix (2-channel stereo playback)
Use this setting when only front speakers are
connected.
≥
The C, LS, and RS signals are combined with
and output through L and R.
2. OFF
: Recorded signal format
(Example: 5.1-channel surround playback)
(default)
3. Return : The display returns to Main Menu.
1. 0.0 msec (default)
2. 1.3 msec
3. 2.6 msec
4. 3.9 msec
5. 5.3 msec
6. Return: The display returns to Main Menu.
1. 0.0 msec
2. 5.3 msec (default)
3. 10.6 msec
4. 15.9 msec
5. Return: The display returns to Main Menu.
7 Speaker
Level
The speaker (in yellow) specified by the number buttons outputs a test signal.
The setting value is shown on the main unit display.Upon completion of the speaker
settings, select "7. Return" and exit. (default : 0dB)
To adjust the test signal volume:
VOL
Notes:
≥
The test signal is not output from a speaker for which “
`¶
” was set. (
➡
page 55)
≥
After increasing the volume level and adjusting the test signal, restore the original optimum
volume level.
Press
1. L ch
2. C ch
3. R ch
4. RS ch
5. LS ch
6. SW
7. Return
<Speaker Level>
Select
Speaker
1. L ch
2. C ch
3. R ch
4. RSch
5. LS ch
6. SW
7. Return: The display returns to Main Menu.
What has been set will be reflected only with
Dolby Digital play.
What has been set will be reflected only when
Dolby Digital play is performed or when ON is
set for PROLOGIC.
To adjust the speaker level:
EN
TE
R
Press
L
C
LFE
S
LS
RS
DOWN MIX
R
S W
REAR PLAY
Lights when Down Mix is ON.
