E
N
G
L
I
S
H
49
E
N
G
L
I
S
H
50
CQ-DVR7000U
CQ-DVR7000U
68
69
Installation (continued)
Anti-Theft System
Remove the removable face plate.
1
Press [OPEN]. The removable face plate
will be opened.
2
Push the face plate to either the right or
left.
3
Pull it out toward you.
.
Remove the trim plate with a
screwdriver.
Pull out the unit while pushing down
the lock lever with a screwdriver.
Remove the unit pulling with both
hands.
4
3
2
1
1
2
3
<
<
<
<
VOL
SEL
TUNE
SOURCE
OSD
CQ-DVR
7000U
DVD R
ECIEV
ER W
ITH C
HANG
ER CO
NTRO
L
DISP
S •MOD
E
R •MO
DE
OPEN
PWR
TRACK
DISC
P •SET
BAND
REMO
TE
PLAY
MUTE
R
<
Removable Face
Plate Case
This unit is equipped with a removable face plate. Removing this face plate makes the radio totally inoperable.
The security indicator will blink.
Remove the Unit
Switch off the power of the unit.
OSD
P
•
MODE
OPEN
P
1
Open
2
Push
3
Pull out
Contact
Main unit
Screwdriver
Trim plate
1
2
Lock lever
Lock lever
4
<
Place the Removable Face
Plate into Case
1
Switch off the power of the unit.
2
Remove the removable face plate. (
➡
page 68)
3
Gently press the button of the case and open the
cover. Place the face plate into the case and take
it with you when you leave the car.
Security Indicator
The security indicator blinks when the removable
face plate is removed from the unit.
1
Press and hold [SEL] for more than 2 seconds to
change to function control mode.
2
Press [SEL] to select “S-LED SEL”.
3
Press [>] [<] to turn the security indicator
(S-LED) ON
Install Removable Face Plate
1
Fit the face plate with its right or left hole on one
of the pins provided on the main unit.
2
Fit the other hold on the other pin applying slight
pressure.
3
Move the face plate up and down a few times to
make sure it is secure. Then close the front
panel and press down the right side of the face
plate until it clicks into plate.
<
<
Security indicator
Contact
1
2
3
Display
Security indicator
Blinks
OFF
≥
This face plate is not water-proof. Do not expose it to water or excessive moisture.
≥
Do not remove the face plate while driving your car.
≥
Do not place the face plate on the dashboard or nearby areas where the temperature rises to high level.
≥
Do not touch the contacts on the face plate or on the main unit, since this may result in poor electrical
contacts.
≥
If dirt or other foreign substances get on the contacts, wipe them off with a clean and dry cloth.
≥
Do not apply a strong downward force onto the face plate and do not put anything on it while it is open,
or it might be damaged.
Default
Caution
