26
26
26
=
≥
Insert the battery correctly.
≥
Make sure that the battery is of the correct type.
≥
Replace the batteries.
≥
Point the remote control at the remote control sensor labeled
“REMOTE”.
E
N
G
L
I
S
H
55
E
N
G
L
I
S
H
56
CQ-DVR7000U
CQ-DVR7000U
74
75
Troubleshooting
❐
Maintenance
Your product is designed and manufactured to ensure the minimum of maintenance. Use a soft cloth for
routine exterior cleaning. Never use benzine, thinner or other solvents.
❐
Product Servicing
If the suggestions in the charts don’t solve the problem, we recommend that you take it to your nearest
authorized Panasonic Servicenter. The unit should be serviced only by a qualified technician.
❐
Replacing the Fuse
Use fuses of the same specified rating (15 A). Using different substitutes or fuses with higher ratings, or
connecting the unit directly without a fuse, could cause fire or damage to the stereo unit.
If the replacement fuse fails, contact your nearest Panasonic Servicenter for service.
Error Display Messages
❐
DVD/Video CD/CD
Display
Cause
Check/Remedy
Display
Cause
Check/Remedy
PAL/NTSC ERR
REGION ERR
E3 PLS EJECT
An attempt was made to play a
PAL disc.
Press [
<
] and check the
disc.
Press [
<
] and check the
disc.
Press [
<
] and check the
disc.
Eject the disc. If the disc
does not eject when you
press [
<
], then simply press
the reset switch.
The unit will not operate for
some reason.
CD
•
CH
s
E1
s
CD
•
CH
s
E2
s
NO DISC
CD
•
CH
s
E3
s
≥
Either the disc is dirty, or
upside down.
≥
There is a scratch on the
disc.
There are no discs in the
changer or magazine.
Load discs in the changer or magazine.
Check the disc. (The changer
automatically switches to the next
disc.)
The changer will not operate
for some reason.
❐
Changer
❐
Remote Control
Press [
<
] on the changer. If the
changer does not respond, press the
changer’s reset switch.
Notes
≥
The number of the disc that is the cause of the error is sometimes displayed before “E1” or “E2”.
≥
Depending on the changer, the information that is displayed and the remedy may sometimes differ in
part. For details, refer to the User’s Manual provided with your changer.
Symptom
Remedy
Page
Troubleshooting Tips
❐
Common
Symptom
Remedy
Page
The buttons do not
work.
Cannot set the clock.
The power does not
come on.
≥
Turn the ignition switch to “ON” or “ACC”.
≥
Connect the cords correctly.
≥
Replace the fuse.
=
70-73
74
The unit produces no
sound.
≥
Turn muting off.
≥
Connect the cords correctly.
≥
Wait until the condensation clears.
40
70-73
=
≥
Change the display to something other than demo mode and
then try again.
≥
Set the MUTE/ATT to “OFF”.
Press [PWR] and turn the power on before attempting to set the
clock.
32
40
32
Pressing the buttons
has no effect.
≥
Either the disc is dirty, or
upside down.
≥
Either the disc is scratched
or has some other problems.
The disc is not playable.
An attempt was made to play a
disc with a region number that
was not “1” or “ALL”.
OSD
This type of disc
cannot be played.
Please eject.
This disc may not
be played in your
region
Please eject.
Mechanical Error
Please eject.
E1 PLS EJECT
Playback Error
Please eject.
E2 PLS EJECT
This type of disc
cannot be played.
Please eject.
The sound quality is
poor and/or noise is
generated when the
external amplifier is
used.
Set the gain of the external amplifier to the medium for operation.
72